Coupled cavity traveling wave tube with velocity tapering

A coupled cavity traveling wave tube with a velocity taper, which affords beam wave resynchronization and thereby enhances is described. The wave velocity reduction is achieved by reducing the resonant frequencies of the individual resonant cavities as a function of the distance from the electron gun, through changes in internal cavity dimensions. The required changes in cavity dimensions can be accomplished by gradually increasing the cavity radius decreasing the gap length from cavity to cavity. The velocity reduction is carried out without an increase in circuit resistive losses and the upper and lower cut off frequencies are reduced in approximately the same manner

Traveling wave tube circuit

A traveling wave tube (TWT) has a slow wave structure (SWS) which is severed into two or more sections. A signal path, connects the end of an SWS section to the beginning of the following SWS section. The signal path comprises an impedance matching coupler (IMC), followed by an isolator, a variable phase shifter, and a second IMC. The aggregate band pass characteristic of the components in the signal path is chosen to reject, or strongly attenuate, all frequencies outside the desired operating frequency range of the TWT and yet pass, with minimal attenuation in the forward direction, all frequencies within the desired operating frequency range. The isolator is chosen to reject, or strongly attenuate, waves, of all frequencies, which propagate in the backward direction. The aggregate phase shift characteristic of the components in the signal path is chosen to apply signal power to the beginning of the following SWS section with the phase angle yielding maximum efficiency

Triterpenoids

This review covers the isolation and structure determination of triterpenoids reported during 2012 including squalene derivatives, lanostanes, holostanes, cycloartanes, cucurbitanes, dammaranes, euphanes, tirucallanes, tetranortriterpenoids, quassinoids, lupanes, oleananes, friedelanes, ursanes, hopanes, serratanes, isomalabaricanes and saponins; 348 references are cited

The Regulation and Development of Bioremediation

The authors describe how federal statutes regulating hazardous wastes create both incentives and disincentives for exploiting the large potential of bioremediation. Ultimately, they argue for regulation attending more to comparative risks and costs

The 20 and 30 GHz MMIC technology for future space communication antenna system

The development of fully monolithic gallium arsenide receive and transmit modules is described. These modules are slated for phased array antenna applications in future 30/20 gigahertz communications satellite systems. Performance goals and various approaches to achieve them are discussed. The latest design and performance results of components, submodules and modules are presented

Designing III-V Multijunction Solar Cells on Silicon

Single junction Si solar cells dominate photovoltaics but are close to their efficiency limits. This paper presents ideal limiting efficiencies for tandem and triple junction multijunction solar cells subject only to the constraint of the Si bandgap and therefore recommending optimum cell structures departing from the single junction ideal. The use of III-V materials is considered, using a novel growth method capable of yielding low defect density III-V layers on Si. In order to evaluate the real potential of these proposed multijunction designs, a quantitative model is presented, the strength of which is the joint modelling of external quantum efficiency and current-voltage characteristics using the same parameters. The method yields a single parameter fit in terms of the Shockley-Read-Hall lifetime. This model is validated by fitting experimental data of external quantum efficiency, dark current, and conversion efficiency of world record tandem and triple junction cells under terrestrial solar spectra without concentration. We apply this quantitative model to the design of tandem and triple junction solar cells, yielding cell designs capable of reaching efficiencies without concentration of 32% for the best tandem cell and 36% for the best triple junction cell. This demonstrates that efficiencies within a few percent of world records are realistically achievable without the use of concentrating optics, with growth methods being developed for multijunction cells combining III-V and Si materials.Comment: Preprint of the paper submitted to the journal Progress in Photovoltaics, selected by the Executive Committee of the 28th EU PVSEC 2013 for submission to Progress in Photovoltaics. 10 pages, 7 figure

Long Term Wind-Driven X-Ray Spectral Variability of NGC 1365 with Swift

We present long-term (months-years) X-ray spectral variability of the Seyfert 1.8 galaxy NGC 1365 as observed by Swift, which provides well sampled observations over a much longer timescale (6 years) and a much larger flux range than is afforded by other observatories. At very low luminosities the spectrum is very soft, becoming rapidly harder as the luminosity increases and then, above a particular luminosity, softening again. At a given flux level, the scatter in hardness ratio is not very large, meaning that the spectral shape is largely determined by the luminosity. The spectra were therefore summed in luminosity bins and fitted with a variety of models. The best fitting model consists of two power laws, one unabsorbed and another, more luminous, which is absorbed. In this model, we find a range of intrinsic 0.5-10.0 keV luminosities of approximately 1.1-3.5 ergs/s, and a very large range of absorbing columns, of approximately 10^22 - 10^24 cm^-2. Interestingly, we find that the absorbing column decreases with increasing luminosity, but that this result is not due to changes in ionisation. We suggest that these observations might be interpreted in terms of a wind model in which the launch radius varies as a function of ionising flux and disc temperature and therefore moves out with increasing accretion rate, i.e. increasing X-ray luminosity. Thus, depending on the inclination angle of the disc relative to the observer, the absorbing column may decrease as the accretion rate goes up. The weaker, unabsorbed, component may be a scattered component from the wind.Comment: 9 pages, 7 figures, accepted for publication in the Monthly Notices of the Royal Astronomical Societ

Children's interactions with interactive toy technology

Abstract Digital toys offer the opportunity to explore software scaffolding through tangible interfaces that are not bound to the desktop computer. This paper describes the empirical work completed by the CACHET (Computers and Children's Electronic Toys) project team investigating young children's use of interactive toy technology. The interactive toys in question are plush and cuddly cartoon characters with embedded sensors that can be squeezed to evoke spoken feedback from the toy. In addition to playing with the toy as it stands, the toy can be linked to a desktop PC with compatible software using a wireless radio connection. Once this connection is made the toy offers hints and tips to the children as they play with the accompanying software games. If the toy is absent, the same hints and tips are available through an on-screen animated icon of the toy's cartoon character. The toys as they stand are not impressive as collaborative learning partners, as their help repertoire is inadequate and even inappropriate. However, the technology has potential: children can master the multiple interfaces of toy and screen and, when the task requires it and the help provided is appropriate, they will both seek and use it. In particular, the cuddly interface experience can offer an advantage and the potential for fun interfaces that might address both the affective and the effective dimensions of learners' interactions

Computer program for analysis of coupled-cavity traveling wave tubes

A flexible, accurate, large signal computer program was developed for the design of coupled cavity traveling wave tubes. The program is written in FORTRAN IV for an IBM 360/67 time sharing system. The beam is described by a disk model and the slow wave structure by a sequence of cavities, or cells. The computational approach is arranged so that each cavity may have geometrical or electrical parameters different from those of its neighbors. This allows the program user to simulate a tube of almost arbitrary complexity. Input and output couplers, severs, complicated velocity tapers, and other features peculiar to one or a few cavities may be modeled by a correct choice of input data. The beam-wave interaction is handled by an approach in which the radio frequency fields are expanded in solutions to the transverse magnetic wave equation. All significant space harmonics are retained. The program was used to perform a design study of the traveling-wave tube developed for the Communications Technology Satellite. Good agreement was obtained between the predictions of the program and the measured performance of the flight tube